Wind Turbine Brake Components
Complete Wind Turbine Braking Systems
CFP supplies a comprehensive range of component parts suitable for almost any wind turbine on the market.
The product line includes complete wind turbine braking systems, developed for wind turbines of any size and model. Engineered for cold and warm climates, for onshore and offshore wind turbines.
All brakes are equipped with replaceable high-quality friction brake pads. Our supplier ICP has developed a diverse range of friction materials suitable for almost any wind turbine braking system on the market. Both original equipment materials or aftermarket approved replacement parts are available. ICP also has the manufacturing capabilities to manufacture friction linings specifically for customer requirements.
For further information, please contact our technical support team who will be able to help:
Email: brakes@custom.com.au
Wind Energy Product and Service Range
With a focus on sustainability and operational excellence, our solutions support the smooth and efficient functioning of renewable energy systems, helping to drive the future of green energy, and meet the demands of this dynamic and rapidly growing sector.
- Brakes
- Brake pads
- Brake discs
- Power Units
- Spare parts/rotable spares
- Hydraulic cylinder repairs
- Accumulator servicing
- Hydraulic / brake training
ICP Yaw Brake Pad Piston
Yaw Brake Pad/Piston is formulated for Antec HEG-1-110 yaw brakes. Field-proven on Acciona 1.5 wind turbine yaw brakes. The non-asbestos organic friction material eliminates noise emissions and has a good resistance to fade and wear.Outside diameter: 120 Ø Friction material: FTL142, organic
Read more
ICP Yaw Brake HHB-5-110
HHB-5-110 acts as an active and passive yaw brake to stop, hold and control yaw movements. Purposefully built for Gamesa G8X wind turbines. Engineered to extremely tight tolerances to avoid oil leakage and expensive turbine modifications.Braking Force: 122,000 N Clamping Force: 47,515 N Actuation Method: Hydraulic, spring applied Interchangeability: Gamesa GP000136 manufactured and tested in Australia using locally available hydraulic components. Electric motors can be any preferred brand. Custom Fluidpower has extensive experience in the selection of the right product for your application.
Read more
ICP Yaw Brake HAB-6-120
HAB-6-120 is an active yaw brake suitable for medium- and large-sized wind turbines. Engineered to extremely tight tolerances to avoid oil leakage and expensive turbine modifications.Braking Force: 434,000 N Actuation Method: Hydraulic Friction: Organic linings Interchangeability: Svendborg BSAB 120
Read more
ICP Yaw Brake HAB-3-90
HAB-3-90 is an active yaw brake purposefully designed for Gamesa G5X wind turbines. Engineered to extremely tight tolerances to avoid oil leakage and expensive turbine modifications.Braking Force: 122,000 N Actuation Method: Hydraulic Friction: Organic linings Interchangeability: Antec
Read more
ICP Yaw Brake HAB-4-90
HAB 4-90 is an active yaw brake suitable for medium- and large-sized wind turbines. Engineered to extremely tight tolerances to avoid oil leakage and expensive turbine modifications.Braking Force: 162,560 N Actuation Method: Hydraulic Friction: Organic linings
Read more
ICP Yaw Brake Pad/Piston
CA0241 is a yaw brake pad/piston formulated for Svendborg CSAA120 yaw brakes. The non-asbestos organic friction material eliminates noise emissions and has a good resistance to fade and wear.Size: Ø120 Friction Material: FTL142 Replaces: Svendborg 590-0159-805, Acciona 1005518
Read more
ICP Organic Brake Pad
CA0001 is an organic brake pad formulated for HAB-2-90 yaw brake. The non-asbestos organic friction material eliminates noise emissions and has a good resistance to fade and wear.Size: 18 x 96 x 16 mm Friction material: FTL142, organic Replaces: Dellner
Read more
ICP Organic Brake Pad 120 Series
120 series is an organic brake pad formulated for Svendborg BSAB120 yaw brakes. The non-asbestos organic friction material eliminates noise emissions and has a good resistance to fade and wear.Size: 425 x 138 x 21 mm Friction material: FTL142 replaces D3731 Replaces: Svendborg 590-0191-001
Read moreCustom Safe Brakes
The CSB series are put through a rigorous testing process by our engineers on our test rig facilities in our product development centre to ensure high performance and quality. Our real point of difference is that our customers have access to our engineers and specialist technicians every step of the way through the project and we provide service and advise long after our field service team install and commission.
Our field service team are on the ground providing asset management and data to our customers and our engineers to complete the circle of customer support. Custom Fluidpower have a range of industrial braking solutions with successful trials installed at renowned West Australian mine sites.
The CSB brake caliper will become the preferred option for many end users because of its simplicity of design, availability of replacement calipers, and localised spare parts and service capabilities across Australia.
